Cleaning Fuel Injectors: How often do you clean your fuel injectors? Most car owners do not even consider cleaning their injectors because they never think about the possibility of clogging.
However, they will eventually shut down after you have used your vehicle for over a few years. You know when the fuel injectors shut down because your gas mileage starts to decrease.
If it gets too bad, you may also notice a contraction coming from your engine after you step on the gas pedal. The only way to solve this problem is to clean your fuel injectors.
Energy distribution systems have evolved over the years. First, the carburetors, then the port fuel injection, and now the direct injection.
Also Read: 5 Best Jeep Wrangler Light Bars for 2021
Later at some point, fuel injectors spray fuel directly into the combustion chamber.
The unfortunate by-product of direct injection technology is the carbon structure. Carbon deposits accumulate when a hydrocarbon such as gasoline burns completely.
When these deposits are out of control, they often require manual removal. A mechanic will remove the manifold and clean the valves.
While soaking in a special chemical bath is one option, blasting is another.
Either way, it is a cumbersome, time-consuming, and expensive process.
Of course, it is best to limit carbon deposits in the first place.
Therefore, prevention is the best cure.
Do I need to clean my fuel injectors?
Direct injection (DI) engines were seen on sports cars and luxury performance vehicles. Today, DI engines are common in sedans, SUVs, pickups, and vans.
Pure fuel injectors are critical to the proper functioning of these engines.
Clogged fuel injectors reduce engine performance in a number of ways. They are responsible for a variety of engine problems:
- Reduced energy savings
- The difficulty starts
- Poor acceleration
- Rough Idling
- Stopping
- Pre-ignition
- Throttle contraction
- High carbon monoxide emissions
- High hydrocarbon emissions
Cleaning fuel injectors in an easy way
What is a fuel injector cleaner and why do you need it? fuel Injector Cleaner is a specially designed gasoline additive with special detergents. These chemicals target fuel injector deposits.
Restore engine power and fuel efficiency with the 104+ Fuel Injector Pro, a comprehensive fuel system cleaner for all engines. This premium fuel injector cleaner restores lost acceleration and improves throttle response. Special direct injection detergent reduces carbon formation.
Avoid expensive trips to your mechanic by consistently using a premium fuel injector cleaner like the 104+ Fuel Injector Pro.
Follow these step-by-step guidelines when you use this premium fuel injector cleaner:
- Pour the bottle contents into the gas tank
- Add gas to full tank
- For ideal results, use a second bottle at the next filling
- Use another bottle every 7,000 miles or so at every oil change
If you want instant satisfaction, you will love the results when you clean your vehicle’s fuel injectors. After working freely as they are designed, you will notice a quick improvement in your engine performance.
Fuel injector maintenance and do’s and don’ts
Use only the fuel injector cleaner as directed. Excessive consumption can damage the injector coil insulation. Also, water and fuel injectors do not mix. A full tank of gasoline can help reduce water in the fuel system, especially in vehicles that sit longer.
Some mechanic works enthusiasts remove the fuel injectors to clean them. This can become a problem if it is not handled properly.
For example, soaking fuel injectors in a powerful cleaner such as acetone can be dangerous. If you remove your fuel injectors, remember that the O-rings and seals should not dry out. This can lead to misfires and engine starting problems.
Sometimes, clogged fuel injectors require mechanical care. Some car enthusiasts use fuel injector cleaning kits to remove more difficult deposits.
Once you have invested in such a service, start the rule of adding fuel injector cleaner from time to time in your gasoline.
How to clean fuel injectors at home?
You do not need to go to an auto technician to clean your fuel injectors. Why not save yourself hundreds of dollars in labor costs by cleaning yourself?
All you need to perform this task is a good-quality fuel injector cleaner kit. You can buy one of these kits online the link is given below.
The tools in the kit include a cleaner fluid, hose, and gauge canister. The gauge measures the fuel pressure, while the hose goes into the fuel injector.
These fuel injector cleaning kits are generally universal, meaning they can be used with most make and model vehicles.
However, if you have a fuel injector cleaning kit designed for your fuel model, always choose it above all else.
Also, if there is no cleaning fluid in the can, you can always buy the liquid separately.
Below are the best cleaning liquids available in the market
- Lucas Fuel Cleaning system
- Lubegard Fuel System Booster Cleaner
- Liqui Moly 2037 Pro-Line Engine Flush
- Max-Clean Fuel System Cleaner and Stabilizer ( Best of All )
Fuel injectors are easy to spot just by opening and lifting the hood. They appear somewhere around your vehicle engine head. Its nozzle should stick directly inside the combustion chamber.
If you have trouble finding them, see your employer’s manual for more information about the location.
Below are 5 basic steps to clean your fuel injectors at home.
1) Remove the fuel pump from the injectors. Use the U-tube to return the fuel to the gas tank. If there is a fuel return line, use it. Now remove the pressure regulator vacuum line.
2) Pick the hose from your cleaning kit and attach it to the fuel pressure port. At this point, all fuel should be kept away from the injectors. If there is exposure the cleaning fluid will ignite.
3) Remove the fuel tank cap. Now you are going to use the canister to keep the cleaning fluid in the injectors. There will be some pressure during this injection. The open cap is a precaution to prevent the pressure leading to combustion from increasing.
4) Turn off the fuel pump if it is not already off. Turn on the vehicle and let the engine run for 6 or 7 minutes. At this point, the cleaning fluid passes through the fuel injectors. Once all the cleaning fluid is gone, the engine automatically shuts off.
5) Now remove the can and hose. Replace the fuel pump on the injectors and reattach the vacuum line. Put the cap back on the fuel tank. At this point, all components should return to their original positions. Turn on your car once again to injure that your injectors are working properly.
Take it for a short drive to see how your car is running. If you find this strange or you hear strange noises, you will probably need to check the fuel injectors to see if anything is going wrong.
Sometimes you may have bad fuel injectors that cannot be protected by cleaning them. In that case, you will need to replace them completely.
Even after that if your gas mileage is bad, there must be another problem that can cause it.
